Optimizing the speaker setting for your listening room

Reviewing and reloading the automatic setup parameters

Use this feature to review the result of the automatic setup.

Parameter

Descriptions

 

 

Multi Measure

Displays the number of listening position

(Multiple point

actually measured.

measurement)

 

You can also reload the automatic setup parameters in case you are not satisfied with the speaker setup and sound adjustments you have configured manually.

Note

If you reload the automatic setup parameters, the settings you have configured manually are cleared. To save the settings before reloading the automatic setup parameters, see “System Memory” (page 108).

Wiring

(Speaker wiring)

Displays the polarity of each connected speaker.

–“NRM” appears when the polarity of the connected speaker is normal.

–“REV” appears when the polarity of the connected speaker is reversed.

–“DET” appears when this unit detects the subwoofer is connected.

–“–––” appears when no speaker is connected to the corresponding speaker channel.

1Set the operation mode selector to FAMP and then press IMENU.

The GUI menu appears in the video monitor.

y

If the menu directory other than “Top Menu” (page 84) is displayed, press and hold IMENU to display the top GUI

menu.

2Press 9k / n repeatedly to select “Setup” and then press 9h.3Press 9k / n repeatedly to select “Auto Setup” and then press 9h.4Press 9k to select “Information” and then press 9h.

5Press 9k / n repeatedly to select the parameter of which you want to check the setting.

Distance

Displays the speaker distance from the

(Speaker

listening position. Press 9h repeatedly to

distance)

switch the unit to display the value of the

 

each speaker distance.

 

 

Size

Displays the size of the connected speakers

(Speaker size)

and the bass cross over frequency (“Cross”).

 

– “LRG” appears when the connected

 

speaker has the ability to reproduce the

 

low-frequency signals effectively.

 

– “SML” appears when the connected

 

speaker does not have the ability to

 

reproduce the low-frequency signals

 

effectively.

 

 

Equalizing

Displays the result of the adjustment of the

(Speaker

frequency responses of each connected

equalizing)

speaker. You can switch the parametric

 

equalizer type that appears in the result

 

display by pressing 9h repeatedly in the

 

“Equalizing” result display. To apply the

 

result that is displayed in the display, press

 

9ENTER.

 

Choices: Natural, Flat, Front

 

– Select “Natural” to average out the

 

frequency response of all speakers with

 

higher frequencies being less

 

emphasized. Recommended if the “Flat”

 

setting sounds a little harsh.

 

– Select “Flat” to average the frequency

 

response of all speakers. Recommended

 

if all of your speakers are of similar

 

quality.

 

– Select “Front” to adjust the frequency

 

response of each speaker in accordance

 

with the sound of your front speakers.

 

Recommended if your front speakers are

 

of much higher quality than your other

 

speakers.

 

 

Level

Displays the result of the adjustment of each

(Speaker level)

connected speaker output level. You can

 

display the result of the adjustment of the

 

speaker level for each parametric equalizer

 

type (see above) by pressing 9h

 

repeatedly. Select “Through” to display the

 

result when this unit does not use the

 

parametric equalizer.

 

 

Angle

Displays the angles of the front speakers,

(Speaker angle)

surround speakers, and front presence

 

speakers.

 

 

40 En