Before performing the following operation, set the operation mode selector on the remote control to FAMP.

Adjusting the speaker level

You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks.

Note

This operation will override the level adjustments made in the automatic setup (page 35) and “Level” (page 94).

1Press CLEVEL and then 9k / n repeatedly to select the speaker you want to adjust.

Display

Adjusted speaker

FRONT L

Front left speaker

 

 

FRONT R

Front right speaker

 

 

CENTER

Center speaker

 

 

SUR.L

Surround left speaker

 

 

SUR.R

Surround right speaker

 

 

SB L

Surround back left speaker

 

 

SB R

Surround back right speaker

 

 

FP L

Presence left speaker

 

 

FP R

Presence right speaker

 

 

SWFR

Subwoofer

 

 

y

The available speaker channels differ depending on the speaker settings.

2Press 9l / h on the remote control to adjust the speaker output level.Control range: –10.0 dB to +10.0 dB

Using audio features

Selecting the recording sourceUse this feature to select a source component from which you want to record.1Press and hold CREC OUT until “REC OUT” appears in the front panel display.2Rotate MPROGRAM to select the source component.

y

To record the input source currently selected, select “SOURCE”.

Note

When zone 4 is turned on, no signal is output at the DVR OUT,

VCR OUT and MD/CD-R OUT jacks.

OPERATION

BASIC

 

 

55 En