Yamaha RX-Z7 Advanced setup, Using the advanced setup menu, 130 En, Press, Press, SPEAKER IMP, REMOTE SENSOR, RS232C STANDBY, REMOTE CON AMP, Initial setting:

Advanced setup

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

Notes

•Only BMASTER ON/OFF, NSTRAIGHT and the MPROGRAM selector are effective while you are using the advanced setup menu.

•All the other operations cannot be made while you are using the advanced setup menu.

•The advanced setup menu is only available in the front panel display.

Using the advanced setup menu

1Press BMASTER ON/OFF on the front panel to release it outward to the OFF position to turn off this unit.

2Press and hold NSTRAIGHT and then press BMASTER ON/OFF inward to the ONposition to turn on this unit.

■Remote sensor REMOTE SENSOR

Use this feature to activate or deactivate the signal- receiving capability of the remote control sensor on the front panel of this unit.

Choice	Descriptions
ON	Select this setting if you want to activate the
	signal-receiving capability of the remote control
	sensor.
OFF	Select this setting if you want to deactivate the
	signal-receiving capability of the remote control
	sensor.

This unit turns on, and “ADVANCED SETUP” appears in the front panel display.

While holding

MASTER

down

STRAIGHT

EFFECT

3Rotate the MPROGRAM selector to select the parameter you want to adjust.4Press NSTRAIGHT repeatedly to change the selected parameter setting.

Note

We recommend setting the parameter to “ON” in most cases.

■Wake on RS-232C accessRS232C STANDBY

Use this feature to set this unit to transmit data via the RS- 232C interface when this unit is in the standby mode.

Choice	Functions
YES	Select this setting to set this unit to transmit data
	via the RS-232C interface.
NO	Select this setting to set this unit not to transmit
	data via the RS-232C interface.

5Press BMASTER ON/OFF to release it outward to the OFF position to save the new setting and turn off this unit.

y

The settings you made are reflected next time you turn on this unit.

■Speaker impedance SPEAKER IMP.

Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.

Choice	Descriptions
8ΩMIN	Select this setting to set the speaker impedance to
	8 Ω. The impedance of each speaker must be 8 Ω
	or higher.
6ΩMIN	Select this setting to set the speaker impedance to
	6 Ω. The impedance of each speaker must be 6 Ω
	or higher (front speakers only: 4 Ω or higher).

Initial setting:

[U.S.A. and Canada models]: YES[Australia model]: NO■Remote control ID settingREMOTE CON AMP

Use this feature to set the remote control ID of this unit for remote control recognition.

Choice	Descriptions
ID1	Select this setting when the ID of the remote
	control is set to “ID1”
ID2	Select this setting when the ID of the remote
	control is set to “ID2”

Setting remote control ID

Use this feature to set the remote control ID. This feature is useful when you control multiple Yamaha AV receiver or amplifier with using the remote control.

130 En