SIRIUS Satellite Radio™ tuning

Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 3SIRIUS.

Setting the SIRIUS Satellite Radio™ preset channels

You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” (page 67).

1Search for a channel you want to set as a preset channel by using one of the SIRIUS Satellite Radio search modes.

For details, see “SIRIUS Satellite Radio™ operations” (page 66).

0 0 1 S I R I U S H i t

Channel number

2Press FMEMORY (or 0MEMORY).

The PRESET indicator lights up in the front panel and this unit automatically selects an empty preset number.

Lights up

PRESET M E M O R Y A 1

0 0 1 S I R I U S H I T

y

To store the selected channel under an empty preset

number automatically, press and hold FMEMORY (or 0MEMORY) for more than 2 seconds instead of step 2.

In this case, the following steps are unnecessary.

To cancel the preset operation, press FMEMORY (or 0MEMORY) again.

3To select the preset channel group and number (A1 to E8), press EPRESET/ TUNING/CH l / h (or 9CAT./A-El / h and 9PRESET/CH k / n) repeatedly.

To select a higher preset channel group and number, press Eh (or 9k).

To select a lower preset channel group and number, press El (or 9n).

y

You can also select a preset number (1 to 8) by pressing the numeric buttons (B).

If you select a preset number being used (“*” appears next to the preset number), the current preset channel will be overwritten.

4Press DENTER (or 9ENTER).

The preset channel is set and the PRESET indicator disappears.

Clearing preset channels

You can clear the assignments of preset SIRIUS Satellite Radio channels.
1Select the preset SIRIUS Satellite Radio channel to clear.
For details, see “Preset Search mode” (page 67).

2Press and hold GSEARCH MODE (or

ISRCH MODE) until “CLEAR?” appears in the front panel display.

3Press DENTER (or 9ENTER) to clear the preset channel.

To cancel the operation, press HSEARCH MODE

(or ISRCH MODE).

68 En