Yamaha RX-Z7 105 En, Setup (Option), INPUT, ADVANCED, OPERATION, ■I/O Assignment, Dimmer (Dimmer), Control range: –4to0, confirm the selection, (Input/output assignment)

Setup (Option)This menu adjusts the optional system settings.■Memory Guard (Memory guard)

Use this feature to prevent accidental changes to sound field program parameter values and other system settings.

Choice		Functions
Off	Turns off the “Memory Guard” feature.
On	Protects the following parameters:
	– sound field program parameters
	–	GUI menu parameters
	–	speaker levels settings

y

When “Memory Guard” is set to “On”, “ ” appears on the left side of the name of a parameter being protected.

■I/O Assignment(Input/output assignment)

Use this feature to assign the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the parameter to reassign the respective jacks and effectively connect more components.

Once the input/output jacks are reassigned, you can select the corresponding component by using the LINPUT selector (or the input selector buttons (3)).

Example: Assigning the CD DIGITAL INPUT COAXIAL jack to “MD/CD-R”.1Press 9ENTER to display the “I/O Assignment” screen.

	Coax	Opt	Opt	Comp HDMI
	In	In	Out	In	In
PHONO
CD	1				EXIT
TV		4
MD/CD-R			8
BD/HD DVD		5		A	IN 1
DVD	2	6		B	IN 2

2Press 9k / n /l / h to select the cell in row“MD/CD-R”, column “Coax In” and then press 9ENTER.3Press 9l / h to select “1” and then press

9ENTER.

Select “None” to clear the existing assignment.

y

To return to the previous screen without change, press

9 k.

Graphical user interface (GUI) menu

4Press 9k / n /l / h to select “EXIT” and then press 9ENTER.

y

You cannot select a specific item more than once for the same type of jack.

■Input Rename (Input rename)

Use this feature to change the name of the input source that appears in the GUI screen and in the front panel display.

1Press 9k / n /l / h to select a character or function and then press 9ENTER to

confirm the selection.

Repeat step 1 until you input a name you want to use.

2Press 9k / n /l / h to select “SAVE” and then press 9ENTER.

y

•To reset the name, select “RESET” and then press

9ENTER.

•To cancel the operation without change, select “CANCEL” and then press 9ENTER.

■Display Set (Display settings)Front Panel Display (Front panel display setting)Dimmer (Dimmer)Use this feature to adjust the brightness of the front panel display.Control range: –4 to0Scroll (Front panel display message scroll)Use this feature to set the front panel display message scroll pattern.

Choice	Functions
Continue	Continuous mode.
	Select this to display the operation status in the
	front panel display in a continuous manner.
Once	Scroll-once mode.
	Select this to display the operation status in the
	front panel display by the first 14 alphanumeric
	characters after scrolling all characters once.

Short Message (Short message display)

Use this feature to activate or deactivate the short message display displayed in the GUI screen in the main zone.

Choice	Functions
On	Activates the short message display function.
Off	Deactivates the short message display function.

OPERATION ADVANCED

105 En