XM® Satellite Radio tuning

Activating XM Satellite Radio

Once you have installed the XM Mini-Tuner Home Dock, inserted the XM Mini-Tuner, connected the XM Mini- Tuner Home Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three places to find your eight character XM Radio ID: On the XM Mini-Tuner, on the XM Mini-Tuner package, and on XM Channel 0. Record the XM Radio ID in the following eight squares for reference.

Note

The XM Radio ID does not use the letters “I”, “O”, “S” or “F”. Activate your XM Satellite Radio service in the U.S. online at http://activate.xmradio.com/ or call 1-800-XM-RADIO (1-800- 967-2346). Activate your XM Satellite Radio service in Canada online at https://activate.xmradio.ca/ or call 1-877-GET-XMSR (1-877-438-9677). You will need a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods you may need to keep your XM Ready home audio system on for up to an hour. When you can access the full lineup on your XM Ready home audio system you are done.

Before performing the following operations, set the operation mode selector on the remote control to FSOURCE.

XM Satellite Radio operations1Rotate the LINPUT selector (or press3XM) to select “XM” as the input source.

The cursor on the left of the XM indicator lights up in the front panel display and the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel appears in the front panel display.

Lights up

USB

DOCK V-AUX VCR DVR CBL/SAT DVD BD/HD DVD

MD/CD-R

TV CD PHONO MULTI CH TUNER XM SIRIUS

NET

 

 

 

0 0 1 P r e v i e w

y

When you select “XM” as the input source, this unit automatically recalls the previously selected channel.

Notes

•The XM Satellite Radio signals cannot be output at the analog AUDIO OUT jacks.

•If a status message or an error message appears in the front panel display or in the GUI screen, see “XM Satellite Radio” (page 139)

62 En

2Search for a channel by using one of the XM Satellite Radio search modes.

•To select a channel from the all channel list, see “All Channel Search mode” (page 62).

•To select a channel by category, see “Category Search mode” (page 62).

•To select a channel from the preset channels, see “Preset Search mode” (page 63).

•To select the desired channel directly by entering the channel number, see “Direct number access mode” (page 63).

y

•You can use the Neural Surround decoder to enjoy the XM HD surround sound content of the XM Satellite Radio broadcasts in multi-channels (page 53).

•You can set the XM Satellite Radio preset channels (page 63).

•You can display the XM Satellite Radio information in the front panel display or in the GUI screen (page 64).

■All Channel Search mode1Press GSEARCH MODE (or ISRCH MODE) repeatedly to select “ALL CHSEARCH”.

2Press EPRESET/TUNING/CH l / h (or

9PRESET/CH k / n) repeatedly to search for a channel within all channels.

y

You can search for a channel quickly by pressing and holding

EPRESET/TUNING/CH l / h (or 9PRESET/CH k / n).

■Category Search mode1Press GSEARCH MODE (or ISRCH MODE) repeatedly to select “CAT SEARCH”.

2Press ICATEGORY (or 9A-E/CAT.l / h) repeatedly to change the channel category.

3Press EPRESET/TUNING/CH l / h (or

9PRESET/CH k / n) repeatedly to search for a channel within the selected channel category.

y

You can search for a channel quickly by pressing and holding

EPRESET/TUNING/CH l / h (or 9PRESET/CH k / n).