Remote control features

Clearing configurations

You can clear all changes made in each function set, such as learned functions, macros, renamed control area names and setup remote control ID.

■Clearing function sets

1Press GSETUP using a ballpoint pen or

similar object.

“SETUP” appears in the display window (4).

2Press 9k / n repeatedly to select “CLEAR” and then press 9ENTER.3Press 9k / n repeatedly to select the desired clear mode.

Clear mode

Descriptions

 

 

L:DVD (etc.)

(L:Three-digit name of the selected control area)

 

Clears all learned functions the respective

 

control area. You can change the control area to

 

be cleared by pressing the desired input selector

 

button (3) or 5SELECT l / h repeatedly.

 

 

L:AMP

Sets all learned functions for controlling the

 

amplifier functions to the initial factory settings.

 

Set the operation mode selector to FAMP to

 

select this clear mode.

 

 

L:TV

Clears all learned functions for TV control area.

 

Set the operation mode selector to FTV to

 

select this clear mode.

 

 

L:ALL

Clears all learned functions.

 

 

M:DVD (etc.)

(M:Name of the selected macro button) Clears

 

the macro programmed for the selected macro

 

button (page 121). The assigned macro to the

 

selected macro button reverts to the initial

 

factory macro. Press the desired macro button if

 

you want to change the macro button you want to

 

clear the programmed functions of.

 

 

M:ALL

Clears all programmed macros. The assigned

 

macro to the selected macro button reverts to the

 

initial factory macro.

 

 

RNAME

Set all the name of the control areas to the

 

default settings.

 

 

FCTRY

Set all settings of the remote control to the initial

 

factory settings.

 

 

4Press and hold 9ENTER for about 3 seconds.When the clearing is successful, “OK” appears in the display window (4).

Notes

•“NG” appears in the display window (4) if clearing was unsuccessful.

•“ERROR” appears in the display window (4) if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

5Press GSETUP again to exit from the setup mode.■Clearing a learned function

1Press GSETUP using a ballpoint pen or

similar object.

“SETUP” appears in the display window (4).

2Press 9k / n repeatedly to select “ERASE” and then press 9ENTER.3Set the operation mode selector toFSOURCE and then press an input selector button (3).If you want to erase the function learned in the AMPor TV control area, set the operation mode selector toFAMP or FTV.4Press 9ENTER.“E-KEY” appears in the display window (4).5Press and hold the button you want to clear for about 3 seconds.If clearing is successful, “OK” appears in the display window (4).

y

•If you continuously want to clear another function, repeat step 3 through 5.

•Once you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).

6Press GSETUP again to exit from the setup menu.

Notes

•“NG” appears in the display window (4) on the remote control if clearing was unsuccessful.

•“ERROR” appears in the display window (4) if you press more than one button simultaneously.

122 En