[4]SUR.BACK/PRESENCE PRE OUT jacks

Surround back or presence channel output jacks. When you only connect one external amplifier for the surround back channel, connect it to the SINGLE (SB) jack.

y

•To output surround back channel signals at these jacks, set “Front Presence” to “None” and “Surround Back” to any parameter except “None” (page 93).

•To output presence channel signals at these jacks, set “Front Presence” to “Yes” and “Surround Back” to “None” (page 93).

[5]SUBWOOFER PRE OUT jackConnect a subwoofer with a built-in amplifier.■Connecting a multi-format player or anexternal decoder

This unit is equipped with 6 additional input jacks (FRONT L/R, CENTER, SURROUND L/R and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, etc. If you set “Input Channels” to “8ch” (page 91), the analog audio input jacks assigned as “Front Input” can be used as the front channel input jacks.

Notes

•When you select “MULTI CH” as the input source, the digital sound field processor is automatically disabled.

•Since this unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers, connect at least a 5.1-channel speaker system when using this feature.

MD/

L

TAPE

 

*

R

CENTER FRONT(6CH) SURROUND

Connections

■Connecting a Yamaha iPod universal dock or Bluetooth wireless audioreceiver

This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as YDS-11, sold separately) or Bluetooth wireless audio receiver (such as YBA-10, sold separately). Connect a Yamaha iPod universal dock or Bluetooth receiver to the DOCK terminal on the rear panel of this unit using its dedicated cable.

DOCK

Yamaha iPod universal dock or

Bluetooth wireless audio

receiver

■Using REMOTE IN/OUT jacks

When the components are the Yamaha products and have the capability of the transmission of the remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input and output jack with the monaural analog mini cable as follows.

PREPARATION

SUB

SUR.BACK

SUB

WOOFER

(8CH)

 

MULTI CH INPUT

outSubwoofer

outCenter

(8ch)out

backSurround

(6ch)outFront

L

outSurround

L

(8ch)outFront

 

L

R

 

 

R

R

Multi-format player/

External decoder

* The analog audio input jacks assigned as “Front Input” in “MULTI CH” (page 91).

REMOTE

IN 1 OUT

IN 2 OUT

 

 

Remote

Remote

control out

control in

*

Infrared signal

Yamaha

receiver or

component

Yamaha

(CD or DVD

component

player, etc.)

*You can connect another set of infrared signal receiver and Yamaha component to the REMOTE IN/OUT 2 jacks same as the REMOTE IN/OUT 1 jacks.

27 En