Yamaha RX-Z7 13 En, Step 3: Turn on the power and start playback, For other operations

Step 3: Turn on the power and start playback

Check the type of the connected speakers.

If the speakers are 6-ohm speakers, set “SPEAKER IMP.” to “6Ω MIN” before using this unit (page 31). You can also use 4-ohm speakers as the front speakers (page 130).

1Turn on the video monitor connected to this unit.

2Press BMASTER ON/OFF inward to the ON position on the front panel.

3Rotate the LINPUT selector to set the input source to “DVD”.

4Start playback of the desired DVD on your player.

5Rotate PVOLUME to adjust the volume.

Quick start guide

6To set this unit to the standby mode, press

AMAIN ZONE ON/OFF.

y

For details about turning on/off this unit and the standby

	mode, see page 31.
■	For other operations
• Optimizing the speaker parameters
	automatically	☞ P. 35
•	Basic playback operations	☞ P. 42
•	Sound field programs	☞ P. 46
•	Pure high-fidelity sounds	☞ P. 54
•	FM/AM radio tuning	☞ P. 56
• XM Satellite Radio tuning		☞ P. 61
• SIRIUS Satellite Radio tuning		☞ P. 65
•	iPod playback	☞ P. 73
• Playback via USB or network		☞ P. 75
•	Bluetooth component playback	☞ P. 71

INTRODUCTION

13 En