Lantronix MSS manual Change Password Incoming, Change Password Limit

Command Reference Change Password Incoming

2.42 Change Password Incoming

 DISABLED 

CHANGE PORT PortList PASSWORD INCOMING   ENABLED 

Controls whether the MSS will ask users for an incoming password when they attempt to connect to the network socket connection ports (ports 200x and 300x, where x is the number of the desired serial port). See Environment Strings on page B-1for more information on network socket connections.

Restrictions Requires privileged user status

ParametersPort

MSS4 only. Specifies a particular port or group of ports.

Note: In the absence of the PortList parameter, the configuration will affect the MSS4’s current port only.

PortList

Specify a particular port or group of ports. Port numbers are specified with integers between 1 and 4, and should be separated with commas (for lists) or dashes (for ranges).

2.43 Change Password Limit

CHANGE [ SERVER] PASSWORD LIMIT number

Limits the number of failures allowed when entering the privileged password, with the Set Privileged command, to become the privileged user. After the specified number of retries, the port will be logged out. The Change Privpass command is used to set the privileged password.

Restrictions	Requires privileged user status.
Parameters	Server
	MSS4 only.
	number
	Enter a value between 0 (no limit) and 100.
Defaults	3

2-37