Lantronix manual Checks the MSS filesystem and corrects any problems

Command Reference			Disk
		/PCCard1 and /PCCard2
		Formats an ATA flash card for use in an MSS PC card slot. An unformatted
		card can not be used by the MSS. The /pccard1 parameter applies to all MSS
		products with one PC card slot (MSS-VIA) or the first (top) slot of the MSS4.
		The /pccard2 parameter applies to the bottom PC card slot of the MSS4.
		Fsck
		Checks the MSS filesystem and corrects any problems.
		Head
		Outputs the beginning of a string.
		Ln
		Creates a hard or soft link for files, linking a file or set of files to another file.
		using no flag creates a hard link. Adding the -s flag creates a soft link.
		Ls
		Displays the contents of a directory. The available flags are:
	-l	Returns a list in long form, which includes information
		about modification date, size, owner, and permissions.
	-t	Sorts the list by modification date, with the newest file
		appearing first.
	-r	Reverses the order of the file listing. For example, if -t
		was also specified, -r would list the oldest file first.
		Mkdir
		Creates a new directory on the MSS RAM or flash disk.
		More
		Displays the contents of a file on the terminal, 24 lines of text at a time.
		Normally the display pauses after each screen and prints “--MORE--” at the
		bottom of the screen. To access the next screen, press the Space bar. To abort,
		press Ctrl-C.
		Mv
		Moves files or directories on the MSS RAM and flash disks. You can also
		rename files with this command by inserting the new filename for target
		Od
		Displays the contents of the specified file as raw hexadecimal byte values. The
		possible flags are:
	-b	Prints the bytes in octal format.
	-ct	Prints the bytes in ASCII format.
	-x	Prints the bytes in hexadecimal format.
		Pwd
		Displays the full pathname of your current directory.

2-55