Lantronix MSS manual Disk

Command Reference Disk

2.70 Disk

	CAT file						
							
	CD directory						
							
	CHMOD code file						
	CP file1 file2						
							
	DF /disk						
							
				/FLASH			
							
	FORMAT /PCCARD1						
							
				/PCCARD2 
	FSCK						
							
	HEAD file						
							
	LNflag file1 file2						
							
	LS		flag		file		
DISK							
	MKDIRdirectory						
							
	MORE file
							
	MV file target						
							
	OD	flag				file	
							
			PWD				
							
	RM					file	
		flag					
	RMDIR directory						
							
	SYNC						
							
	TAIL file						
							
	TEST			flag		file	
							
	TOUCH file						
							

Performs disk management functions for the MSS and, for models with PC card support, for any installed ATA flash card. The MSS contains two modifiable directories—/ram and /flash—and one read-only directory—/rom. For MSS models with one PC card slot, an ATA card can be accessed as /pccard1; for models with two slots, the card in the top slot can be accessed as /pccard1 and the card in the bottom slot as /pccard2.

The Disk commands are very similar to the file management commands in UNIX environments. Unlike the similar UNIX commands, each disk command must be preceded by the word DISK. The commands are also not case-sensitive.

The Disk commands honor disk permissions. All disks are read only for non-privileged users.

Restrictions	The Format and FSCK parameters requires privileged user status.
	Only apply to the MSS4, MSS100, MSSLiteX, and the MSS-VIA.
	The ROM disk is read-only and cannot be modified by users.

2-53