Lantronix MSS manual Rightmost Number

Show 802.11 Errors	Rightmost Number
00000100	Authentication with the AP failed because the WEP key the unit is using is not
	the same as the key the AP is using.
00000080	Authentication with the AP failed because either the unit or the AP sent an
	incorrect authentication packet. Some APs will erroneously return this error
	code when the problem is actually "authentication type not allowed".
00000040	Authentication with the AP failed because the AP does not allow the
	authentication type requested by the unit.
00000020	Authentication or association with the AP failed for administrative reasons.
00000010	Reassociation with another AP serving the same ESS as the previous one failed
	because the association could not be confirmed by the previous AP.
00000008	Association with the AP failed because the AP does not support all 802.11
	options requested by the unit.
00000004	Authentication or association with the AP failed, or the unit was
	deauthenticated or disassociated by the AP for a reason explicitly given as
	"unspecified".
00000002	Could not find any beacons matching the network parameters the unit is
	configured with. Most likely there is no AP or ad-hoc network within range
	that satisfies the unit's ESSID, NETWORK-TYPE, and CHANNEL
	parameters.
00000001	Internal error.

B.2.2 Rightmost Number

80000000Unassigned.

40000000Unassigned.

20000000Unassigned.

10000000Unassigned.

08000000Unassigned.

04000000Unassigned.

02000000Unassigned.

01000000Unassigned.

00800000Unassigned.

00400000Unassigned.

00200000Unassigned.

B-3