Lantronix MSS manual Command on

Page 29

Command Reference

Change Dedicated

 

Hostlist

 

Dedicates the port to a list of hosts. For more information, see the Hostlist

 

command on page 2-58.

 

LAT

 

Dedicates the port to a LAT service.

 

servicename

 

Enter the name of the desired LAT service.

 

None

 

Disables all previously-configured dedicated hosts.

 

Rlogin

 

Dedicates the port to Rlogin connections.

 

Seqlist

 

Enables a sequential hostlist. When a sequential hostlist is enabled, the MSS

 

will attempt to connect to the first host in the hostlist. If that connection fails,

 

it will attempt to connect to the second host listed, and if that fails, the third

 

host, continuing through all hostlist entries. As soon as a valid connection is

 

established, normal data flow will occur between the MSS and the connected

 

host.

 

SPX

 

Dedicates the port to an SPX host.

 

SAPname

 

Enter the target SPX host’s SAP name.

 

TCP

 

Specifies a TCP/IP host. By default, TCP opens a regular Telnet connection

 

that includes Telnet IAC option negotiation. The :T environment string allows

 

you to open a raw TCP socket with no Telnet option negotiation, if desired.

 

The :R environment string allows you to make an Rlogin connection. A socket

 

number can also be added to connect to a socket other than the default.

 

hostname

 

Enter a text host name or a numeric IP address.

 

envString

 

Add the desired environment key(s). See Appendix B for a complete list of

 

strings. Options must be separated by colons.

Defaults

Disabled

Examples

Local> CHANGE DEDICATED TCP chimaera:2001T

 

(forms a raw Telnet connection to socket 2001 on host chimaera)

 

Local> CHANGE DEDICATED TCP :4096US120

 

(forms a passive UDP connection with any host where once a packet is received, the

 

MSS will communicate with only that host until 120 seconds of inactivity have

 

occurred and will then return to the initial state of accepting a UDP packet from any

 

host.)

See Also

Change Preferred, page 2-39; Crypt Password, page 2-52; Hostlist, page 2-58

2-20

Image 29
Contents MSS Reference Manual Part Number Contents Contents Iii Index What’s New Command SyntaxKey Purpose Command Line EditingAbout This Manual HelpCommand Reference Change Change 80211 EnabledBackward Change 80211 Antenna DefaultsRestrictions Change 80211 Fragmentation ErrorsChange 80211 MAC Address ParametersExamples Change 80211 Network ModeChange 80211 Region Change 80211 PowerChange 80211 RTS Change 80211 ResetChange 80211 WEP Current port only Change AccessChange Autobaud DefaultsDynamic See AlsoChange Autostart Dashes for ranges Change Bootgateway Change Backward SwitchDefaultsEnabled Change BootpChange Break Restrictions Requires privileged user status ParametersPortDefaults Bytes DefaultsNone See AlsoChange Buffering Change CharsizeChange Datasend Condition has been detected Restrictions Change DedicatedCommand on Change Domain Change DhcpChange DTRWait Change DSRLogoutChange Flow Control DefaultsDisabledChange Gateway Change Forward SwitchChange Inactive Logout Change Inactive TimerDefaultsDisabled See Also Change Incoming Change IPSecurity Change IPAddressChange LAT CircTimer Change Loadhost Change LAT GroupsChange LAT Identification Change Local Switch Change Modem Control Change LoginpassChange Name Change Modem EmulationChange NetWare Encapsulation Change NameserverChange NetWare Loadhost Change NetWare Internal NetworkParametersfileserver Change NetWare RoutingChange Parity Change Passflow Change Password Limit Change Password IncomingChange Portname Change Password ProtectChange Preferred Change Rarp Change PrivpassChange Retransmit Limit Change RloginChange RS485 Change Session Limit Change Signal CheckChange Secondary Change SNMPSetComm Change SilentbootChange Speed Change SoftwareTwo colons and the startup file name of up to 47 characters Change StartupChange Subnet Mask Defaults See AlsoChange Stopbits Change Telnetdest DefaultsConsoleChange TCPKeepalive Parameters Examples Change TelnetpadChange Termtype Daytime is only supported over UDP Change TimeserverChange Wins Change VerifyCrypt Password Disk Digit Meaning Checks the MSS filesystem and corrects any problems Rf command Disconnect Delete IPSecurityFinger ParametersusernameParameterskeyword ForwardHostlist Initialize Show Hostlist commandParametersserviceName ParametersDelay78 LAT Logout PortPing NetstatResume ParametershostnameParametersIPaddress Rlogin84 RTC ParametersAntenna Set PrivilegedShow Show IPsecurity Show HostlistShow NetWare Show NodesShow RS485 Show PortsShow Server ParametersAllShow Session Show ServicesParametersBootparams Show Users Show SnmpShow Version SourceParametersSAPname 100 SPXTelnet Zero TestFull Contact Information Problem Report ProcedureMultiple Strings UsageAvailable Strings Xxxx Usage ExamplesParametersS 1.5 or1.11 Y Leftmost Number Error BitsIntroduction 08000000 1000000004000000 02000000Rightmost Number Unassigned 00000004 Internal error 00000002 00000001 Index Security 2-27,2-57,2-64IPX NetWare Login 2-31,2-37UDP 2-50,B-3 Telnet 2-48,2-68