Lantronix MSS manual Change Startup, Two colons and the startup file name of up to 47 characters

Command Reference	Change Startup
	rate
	Available speeds (baud rates) are generally 300, 600, 1200, 2400, 4800, 9600,
	19200, 38400, 57600, 115200, and 230400 baud. The MSSLite can only go as
	high as 38400 baud.
Defaults	9600 baud
See Also	Change Autobaud, page 2-11.

2.59 Change Startup

CHANGE

SERVER STARTUP

		
	host: filename	
		
	node:: filename	
FILE		
	node\sys:\login\ filename	
		
	NONE	
		
	RETRY num

Configures the startup configuration file that the MSS will attempt to download at boot time. The included commands will configure the MSS before any users and services are started. If a text hostname is used for TFTP, the name must be resolvable at boot time, otherwise you must use an IP address.

The Telnet console is available at the time the MSS attempts to download the startup file. If there is a problem with the download, you can still log into the MSS and determine what went wrong.

Restrictions	Requires privileged user status.
	The MSSLite, MSS4, and the MSS-VIA do not support LAT or SPX.
Parameters	Server
	MSS4 only.
	host:filename
	Used to load from a TCP/IP host via TFTP. Enter a TCP/IP hostname or IP
	address followed by a colon and a startup file name of up to 47 characters. If
	you use a text host name, it must be resolvable at boot time.
	node::filename
	Used to load from a VAX machine via LAT. Enter the nodename followed by
	two colons and the startup file name of up to 47 characters.
	node\SYS:\LOGIN\filename
	Used to load from a Novell fileserver. Enter the proper node and filename. The
	entire path should be no more than 47 characters long.
	None
	Clears any previously configured startup settings.
	Retry
	Re-attempts load of the startupfile a certain number of times before giving up.
	2-46