Lantronix MSS 10000000, 08000000, 04000000, 02000000, 01000000, 00800000, 00400000, 00200000

Page 85

Show 802.11 Errors	Leftmost Number
10000000	Internal error.
08000000	Fragment reassembly timed out. Failed to receive all the fragments of a
	fragmented 802.11 packet before the reassembly window expired. Dropped
	some correctly received fragments.
04000000	Received an 802.11 packet with invalid subtype code.
02000000	Received an 802.11 packet with invalid type code.
01000000	Received an 802.11 packet with invalid version code.
00800000	Dropped a correctly received 802.11 packet due to lack of a sufficiently sized
	buffer to hold it. May happen under heavy network load if applications are not
	processing network data fast enough.
00400000	Internal error.
00200000	Internal error.
00100000	Failed to transmit an 802.11 management packet.
00080000	Failed to transmit an 802.11 data packet.
00040000	Internal error.
00020000	Lost contact with the AP. Unit will attempt to reestablish contact by itself.
00010000	Unit was deauthenticated or disassociated by the AP for attempting to pass data
	packets before being fully associated. (Indicates confusion of either the unit or
	the AP.)
00008000	Unit was disassociated by the AP for inactivity.
00004000	Unit was deauthenticated or disassociated by the AP because the AP is going
	offline or being reconfigured to serve a different network.
00002000	Unit was deauthenticated by the AP because its previous authentication is no
	longer valid.
00001000	Authentication or association with the AP failed, or the unit was
	deauthenticated or disassociated by the AP for an unknown reason.
00000800	Association with the AP failed because the unit does not support all of the data
	rates marked as basic in the AP.
00000400	Association with the AP failed, or the unit was disassociated by the AP because
	the AP is full, and cannot handle any more stations associating with it.
00000200	Authentication with the AP timed out. The AP did not receive an expected
	reply from the unit within the required time window.

B-2

Image 85

Contents MSS Reference Manual Part Number Contents Contents Iii Index What’s New Command SyntaxKey Purpose Command Line EditingAbout This Manual HelpCommand Reference Backward Change 80211 EnabledChange Change 80211 Antenna DefaultsRestrictions Change 80211 Fragmentation ErrorsChange 80211 MAC Address ParametersExamples Change 80211 Network ModeChange 80211 Region Change 80211 PowerChange 80211 RTS Change 80211 ResetChange 80211 WEP Current port only Change AccessChange Autobaud DefaultsDynamic See AlsoChange Autostart Dashes for ranges Change Bootgateway Change Backward SwitchDefaultsEnabled Change BootpChange Break Restrictions Requires privileged user status ParametersPortDefaults Bytes DefaultsNone See AlsoChange Buffering Change CharsizeChange Datasend Condition has been detected Restrictions Change DedicatedCommand on Change Domain Change DhcpChange DTRWait Change DSRLogoutChange Flow Control DefaultsDisabledChange Gateway Change Forward SwitchDefaultsDisabled See Also Change Inactive TimerChange Inactive Logout Change Incoming Change IPSecurity Change IPAddressChange LAT CircTimer Change LAT Identification Change LAT GroupsChange Loadhost Change Local Switch Change Modem Control Change LoginpassChange Name Change Modem EmulationChange NetWare Encapsulation Change NameserverChange NetWare Loadhost Change NetWare Internal NetworkChange Parity Change NetWare RoutingParametersfileserver Change Passflow Change Password Limit Change Password IncomingChange Portname Change Password ProtectChange Preferred Change Rarp Change PrivpassChange Retransmit Limit Change RloginChange RS485 Change Secondary Change Signal CheckChange Session Limit Change SNMPSetComm Change SilentbootChange Speed Change SoftwareTwo colons and the startup file name of up to 47 characters Change StartupChange Stopbits Defaults See AlsoChange Subnet Mask Change TCPKeepalive DefaultsConsoleChange Telnetdest Change Termtype Change TelnetpadParameters Examples Daytime is only supported over UDP Change TimeserverChange Wins Change VerifyCrypt Password Disk Digit Meaning Checks the MSS filesystem and corrects any problems Rf command Disconnect Delete IPSecurityFinger ParametersusernameHostlist ForwardParameterskeyword Initialize Show Hostlist commandParametersserviceName ParametersDelay78 LAT Logout PortPing NetstatResume Parametershostname84 RTC RloginParametersIPaddress Show Set PrivilegedParametersAntenna Show IPsecurity Show HostlistShow NetWare Show NodesShow RS485 Show PortsShow Server ParametersAllParametersBootparams Show ServicesShow Session Show Users Show SnmpShow Version SourceTelnet 100 SPXParametersSAPname Zero TestFull Contact Information Problem Report ProcedureAvailable Strings UsageMultiple Strings Xxxx Usage ExamplesParametersS 1.5 or1.11 Y Introduction Error BitsLeftmost Number 08000000 1000000004000000 02000000Rightmost Number Unassigned 00000004 Internal error 00000002 00000001 Index Security 2-27,2-57,2-64IPX NetWare Login 2-31,2-37UDP 2-50,B-3 Telnet 2-48,2-68