10.4.1 Setting the
During programming, inserted data is not fully updated (e.g. Frame Counter Information). To get updated information, leave the
Ñfor more than three seconds.
Once the
•Pressing the key Ê or Ë will move the cursor > up or down. Pressing the key Í or Ì activates sub menus.
•Within sub menus the cursor > can be moved up and down again by pressing the key Ê or Ë. The keys Í or Ì will now change settings (e. g. switch the insertion of a user text window on and off), or activates functions (position mode of a window or EXIT).
•If the windows position mode is activated, the keys Ê or Ë will move the window across the video image. To leave the position mode press the Enter/Insert key Ñ briefly.
•To go from a sub menu back to the main menu, position the cursor > by using the keys Ê and Ë on the line EXIT and press the key Í or Ì.
•Active lines are marked with a dash symbol
They can be reached with the cursor > within a menu using the keys Ê and Ë. Lines may be visible but without a dash because the currently selected mode does not use this feature. E.g. when gain is not in manual control mode, the line value is not active because value cannot be changed in the automatic control mode. In this case, no dash symbol – is displayed and the line cannot be reached with the cursor >. To activate this line, switch from automatic to manual gain control mode.
| Changes made to settings are immediately activated. |
Note: | Pressing the Enter/Insert key Ñ for more than |
| three seconds will cause the system to exit the |
| |
| regardless of which menu is activated, with the |
| exception of the positioning mode. |
106