Video-Asssist-System

MENU LOAD/STORE

 

-> - STORE SET

1

(CONFIRM BY

 

ENTER)

 

- LOAD SET

1

(NO UNDO)

 

-SET ALL SETTINGS TO DEFAULT

-EXIT

10.4.3Load/Store Menu

The IVS can store up to 5 sets of settings and recall them. The default values are a 6th set of settings. Thus it is possible to make all settings for e.g. indoor shooting and store them as setting 1. Shooting continues with some exterior scenes and the operator will make all settings for this and store them as setting 2. When the work is continued indoors, it is very easy to recall all the settings stored as setting 1 and get the same image appearance as before.

A set of settings consists of all set-ups in the IVS. Everything which can be set electronically, will be stored and recalled. All video adjustments such as manual gain control, white balance, flicker free, outputs with or without data and line interpolation as well as all inserter setups, e.g. user text insertion off or on, frame lines and so on are stored and recalled.

The adjustment of the white level of the inserted data, an inverse display and a fine adjustment of the vertical position is described in chapters 10.4.5 White Level, Inverse and Fine Positioning.

Changes made to settings are immediately activated. Check all settings on a correctly adjusted monitor.

• Enter the Load/Store submenu from the main menu.

Store Settings

The set of settings, that are currently active, can be stored as one out of five settings.

•Move the cursor > with the Ê and Ë keys to the line

– STORE SET. Pressing the Í key will switch from 1 to 2 all the way up to 5 and then back to 1, the Ì key will step in the opposite direction.

108