8. Optics 

8.1 Lenses

All ARRIFLEX lenses with a PL-mount can be used. Lenses with a Ø 41 mm standard or bayonet mount can be used with a suitable adapter. Heavy and long lenses, such as zoom lenses, must be supported at all times.

Attaching Lenses

•Remove the protective cap from the lens mount receptacle by turning the lens lock ring Aphoto counter-clockwise (as viewed from in front of the camera) as far as it will go and then pulling out the protective cap.

Never put your fingers into the lens mount receptacle.

•Push the lens into the lens mount receptacle without catching it at the edges. One of the four slots on the lens mount must fit over the index pin Aphoto.

•Press the lens flat onto the lens mount receptacle and turn the lens lock ring clockwise to tighten.

Note:

The camera is permanently set in Super 16

 

configuration.

Optics

index pin

lens ring

49