Setting a User-Adjustable ARRIGLOW Color (Mode 7)

•Push the “+“ DIMMER button on the camera left side so you can see the ARRIGLOW in the viewfinder.

•Press the “MODE“ button until the display shows Mode 7.

•Press the “SEL” button to make the ARRIGLOW color number flash.

•Press the “SET“ button until U appears.

•Pressing the “SEL“ button will cycle through the “r“ (red), “G“ (green) and “B“ (blue) values of the user color.

•Pressing the “SET“ button changes the value from 0 (no color) up to 16 (maximum color).

•Stop when the color is as you like it – no confirmation is necessary.

Camera Operation

71