Mini-Monitor Output as clean video or video with data

The mini monitor output can be programmed to have either clean video or video with data. Both mini monitor outputs are in parallel, so there are either no data, or data on both outputs.

If the on-screen menu control is on (red LED next to the Enter/Insert key Ñ is on), there will always be data in this output. This is necessary because if the output is switched to data off, no inserter information is visible and therefore, it would be impossible to go back into the on- screen menu to change the settings.

•Move the cursor > with the keys Ê and Ë to the line

– MINI MON DATA. Pressing the key Í or Ì will switch the insertion of data in the mini monitor between ON and OFF.

White Level

This line is used to change the brightness of all man readable windows except the frame lines. Value 0 means dark grey, value 3 corresponds to bright white characters.

•Move the cursor > with the keys Ê and Ë to the line

– TXT WHITE LEV.. By pressing the key Í the values for the brightness of the characters will increment from 0 to 3, and after that back to 0. The key Ì will decrement in the opposite direction.

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

- SHARPNESS

2

- BNC OUT

Y/C

- Y/C DATA

ON

- GENLOCK

OFF

-> - MINI MON DATA

ON

- TXT WHITE LEV.

2

- TXT INVERS

OFF

- TXT FINE POS

2

- EXIT

 

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

- SHARPNESS

2

- BNC OUT

VBS

Y/C DATA

 

- GENLOCK

OFF

- MINI MON DATA

ON

-> - TXT WHITE LEV.

2

- TXT INVERS

OFF

- TXT FINE POS

2

- EXIT

 

Video-Asssist-System

125