Video-Asssist-System

82

MENU

VIDEO/TEXT ADJUST

-

FLICKERFREE

ON

-

LINE INTERP.

ON

-

SHARPNESS

2

-> -

BNC OUT

Y/C

-

Y/C DATA

OFF

-

GENLOCK

OFF

-MINI MON DATA ON

-TXT WHITE LEV. 2

- TXT INVERS

OFF

-TXT FINE POS. 2

-EXIT

Black and White Output

The Y part of the Y/C output is a standard black and white signal. To get black and white, use a standard BNC cable with 75 Ω connected to the É/Y output and switch to Y/C out.

Black and white or Y signal is only available if the output is switched to Y/C out.

•Use the on-screen program mode to switch between composite and Y/C. Enter the main menu by pressing the Enter/Insert key Ñ for more than 3 seconds. Go to sub menu VIDEO/TEXT ADJUST. The menu line BNC OUT can be switched between VBS and Y/C.

See chapter 10.4 Inserter Facilities for information on the on-screen program mode.

There are clean video and video with data signals available from the same connector.