•To switch between clean video and video with data, use the on-screen program mode. Enter the main menu by pressing the Enter/Insert key Ñ for more than 3 seconds. Go to sub menu VIDEO/TEXT ADJUST. The menu line Y/C DATA, which can only be reached if BNC OUT is on Y/C, switches between clean video and video with data on the Y/C signal. The line displays Y/C DATA ON or OFF.

See chapter 10.4 Inserter Facilities for information on the on-screen program mode.

In the clean video output almost no electronic information is inserted. Only a rolling bar at the lower left corner of the video image indicates the film camera is running.

In the video with data output, additional data such as format marks or camera status information can be inserted.

An adapter cable from the two BNC connectors to a standard Y/C connector is included in the IVS package on initial delivery. Connect the red end to the È/C output and the white end to the É/Y socket Aphoto.

MENU

VIDEO/TEXT ADJUST

-

FLICKERFREE

ON

-

LINE INTERP.

ON

-

SHARPNESS

2

-

BNC OUT

Y/C

-> -

Y/C DATA

ON

-

GENLOCK

OFF

-MINI MON DATA ON

-TXT WHITE LEV. 2

- TXT INVERS

OFF

-TXT FINE POS. 2

-EXIT

Video-Asssist-System

81