4. Installation of the Camera



4.1 Packing and Transport

In order to prevent damage to the mirror shutter, a protective cap must be in the lens mount receptacle at all times.

When the ARRIFLEX 416 is transported or stored without a magazine, the magazine opening cover Aphoto should be in place.

Loaded or empty magazines should only be transported or stored with the loop protector Aphoto attached to avoid damage to the film stock and the magazine throat assembly.

4.2 Tripod & Remote Heads

The following tripod heads are suitable for use with the ARRIFLEX 416:

•ARRIHEAD

•ARRIHEAD 2

•ARRIHEAD 2 with integrated encoders

•ARRI fluid heads

•Sachtler Studio 7, 150 H

•Mitchell head

•OConnor 1030/2060/2575

•Moy head

•Ronford Mini 7/F7/2003/2015/Atlas 30/Atlas

•A&C Pee Pod 500, 1000 & 1600/Power Pod 2000 & Classic

•Hot Head

•Cam-Remote head

•Worall head

In applications where the camera mount is subject to high forces (e.g. helicopter mounts) the camera must be additionally secured with retaining cords. All fastening screws must be tightened firmly with an appropriate screwdriver (not with the commonly used coin!).

tallationIns

15