•Camera status display
Camera status information, e.g. camera speed and film counter data are passed on a bus interface from the camera to the video assist and can be displayed in a camera status line on the monitor.
•Lens Data Information
Lens information, such as lens type, focal distance, depth of field, iris and focal length can be electronically inserted in the video image if they are available, e.g. from a lens data archive.
•System display
Camera system information is available in the video assist. Thus, it is possible to see camera warnings such as low battery on the monitor.
•Integrated text inserter
Additional text such as take numbers or the production name can be added to the video image by entering the text on the IVS.
•Y/C Outputs
The usual composite outputs can be switched to an Y/C output (S VHS) for an even better video image without annoying color artefacts, with or without data inserted into the video image. The Y/C output uses two BNC sockets.
•
All functions, which do not directly affect the image appearance, such as frame lines, can be conveniently programmed with an
•Dedicated controls
Important image changes, such as gain or white balance, can be performed in parallel to the
•Image compare function
It is possible to store a chosen image and compare it against the live input. This clearly shows the difference between the images, e.g. during stop effect shots.
•Automatic and manual gain control
The gain is controlled automatically to its best value but can also be set manually.
Note: | The IVS package already includes a lens for |
| Super 16, a 1.5 mm Allen key for image |
| adjustment and a Y/C (S VHS) cable. |
75