Video-Asssist-System

124

MENU VIDEO/TEXT ADJUST

- FLICKERFREE

ON

- LINE INTERP.

ON

- SHARPNESS

2

- BNC OUT

VBS

Y/C DATA

 

-> - GENLOCK

ON

-MINI MON DATA ON

-TXT WHITE LEV. 2

- TXT INVERS

OFF

-

TXT FINE POS

2

-

EXIT

 

GENLOCK on/off

It is possible to synchronize the IVS to an external video signal, thus allowing the user to switch between different video signals without synchronizing problems.

•Connect a standard video signal of the same type as the video system (PAL or NTSC) to the Video output with no data (C-Output).

•Move the cursor > with the keys Ê and Ë to the line

– GENLOCK. Pressing the key Í or Ì will switch genlock ON or OFF.

The video signal out of the connector for video with data is now synchronized to the incoming video signal connected to the other BNC socket.

Note:

GENLOCK is only available, if the output is on

 

VBS mode.

Note:

This setting is switched back to GENLOCK off after

 

the IVS is started (after power down/power up)

 

to avoid accidental operation.