•When the required number is reached, press the Enter/Insert key Ñ to store this setting under the given number. The word DONE will appear for 3 seconds to indicate that the setting was stored. After this, the display will return to its normal mode.
The new set of settings will immediately replace the old set of settings. The old settings can not be recalled.
Load Settings
It is possible to load one out of five settings. The new settings will influence all adjustments that can be made electronically.
The new settings will immediately replace the previous settings. If the old settings might be needed again, store them first as described in the previous chapter Store Settings.
•Move the cursor > with the Ê and Ë keys to the line
– LOAD SET. Pressing the Í key will switch from 1 to 2 all the way up to 5 and back to 1, the Ì key will switch in the opposite direction. Pressing either the Í or Ì keys will immediately load the new settings.
MENU | LOAD/STORE |
|
STORE SET | 1 | |
| (CONFIRM BY |
|
| ENTER) |
|
- | LOAD SET | 1 |
| (NO UNDO) |
|
- | SET ALL |
|
| SETTINGS TO |
|
| DEFAULT |
|
- | EXIT |
|
|
|
|
MENU | LOAD/STORE |
|
- | STORE SET | 1 |
| (CONFIRM BY |
|
| ENTER) |
|
LOAD SET | 1 | |
| (NO UNDO) |
|
- | SET ALL |
|
| SETTINGS TO |
|
| DEFAULT |
|
- | EXIT |
|
|
|
|
109