Camera Operation
Mode 1 | Mode 3 |
total exposed film or takelength | take length or total exposed film |
PS/CCU button
LOCK button
NORM button
black bar to indicate Mode 1
PHASE button
RUN button 
MODE |
| button | SEL / SET buttons |
|
Film Counter
Displaying the Film Counting Values (Modes 1 and 3)
Film counting values are shown in Modes 1 and 3. Two different counting values are shown respectively:
•the total amount of exposed film or
•the take length (amount of film used in an individual take) A “t” in the first digit of the upper display line indicates the display of take length.
Setting the Film Counter Configuration (Mode 3)
The display configuration can be set individually. The two shown combinations are possible:
The desired display configuration is set in Mode 3:
•Change from Mode 1 to Mode 3 by pressing the “MODE” button twice.
•Press the “SEL” button twice; the first digit in the upper display line blinks.
•Within three seconds, press the “SET” button.
•The currently set counting value of Mode 3 is displayed. The corresponding counting value in Mode 1 is automatically altered.
60