Camera Operation
phase button
RUN button
operational control indicator 
RUN button
black bar to indicate Mode 1
SEL/SET buttons
Running the Camera
If the operation control indicator glows red while in Standby, the camera is not ready and will not run (see “Overview of Display Symbols”).
•Briefly press the “RUN” button. While the camera is running up to speed, the operation control indicator Aphoto glows red. Once the set frame rate has been reached, the operation control indicator turns green.
Note: | If the “PHASE” button has not been pushed after |
| power on or after a new magazine has been |
| attached, the first time “RUN” is pressed the camera |
| performs a 2 second loop check before running. |
Stopping the Camera
•Press the “RUN” button again Aphoto briefly. While the camera is slowing down the operation control indicator glows red. The mirror shutter automatically stops in a position that enables unrestricted viewing through the viewfinder. On reaching this position, the operation control indicator flashes green before going out.
56