11. Timecode
The ARRIFLEX 416 is equipped with a TC generator which produces 80bit Timecode with a data structure conforming to SMPTE RP136, Format Type C. The TC generator is set using a master clock. The precision of the TC generator ensures that for 8 hours after the synchronization (at 0°C
-50°C) the difference remains less than one frame, if the time code generator of the audio machine is precise, too. Every frame is therefore clearly identifiable for synchro- nization or editing lists.
A new feature on the 416 further improves the accuracy of the synchronization between the 416 TC generator and the master clock. To exploit this feature the camera must be connected to an Ambient Clockit as the master clock.
Timecode is recorded in the magazine, its position on film conforming to SMPTE RP114, at standard speeds of 23.976, 24.00, 25.00, 29.97 and 30.00 fps.
The TC information also includes speed of recording which is described in connection with Timecode as frame rate. For the ARRIFLEX 416 the valid frame rate is always the most recently set standard speed.
For Timecode operation, please make sure that the magazine is equipped with a Timecode exposure module K2.55034.0.
The TC generator integrated in the ARRIFLEX 416 can be synchronized to other equipment with a TC generator. A LTC signal (Longitudinal TimeCode) from any TC generator is plugged into the “TCC“ socket. The signal level must be higher than 500 mV
Timecode
173