Camera Body

•Turn the shutter tool to set the shutter to the desired shutter opening. The shutter is held in its preset positions by a sprung-ball, which can be felt as the shutter is adjusted. Make sure the shutter registers properly at the set opening.

•Remove the shutter tool and film track cleaning rod

Operation of the camera when the mirror shutter is not correctly locked in position may cause incorrect exposure!

phase button

Shutter Angle Measurement

•Holding the “PHASE” button pressed in Standby will make the camera inch forward.

•During this the display shows the measured shutter angle in the upper line. The lower line displays the voltage of the power supply or the percentage of remaining battery capacity or the number of magazine rolls left.

44