Displaying On-board Battery information (Mode 3)

The options in this section are only available when an OBB-2 on-board battery is attached.

•Change from Mode 1 to Mode 3 by pressing the “MODE” button twice. The display shows the battery voltage.

•Press the “SEL” button three and the display changes to capacity, shown as e.g. “CP. 72“.“CP“ blinks. This example would mean the attached OBB-2 battery has a remaining capacity of 72%.

•Press the “SEL“ button once and the display indicates the remaining number of magazines the battery can run. The display might show “CAS.4“, meaning 4 complete magazines (or ‚cassettes‘ in German) can still be run. “CAS“ blinks.

•Press “SEL“ once more and the display returns to showing supply voltage.

•Press “SET“ while the selection you want is blinking to chose that option.

Note:

When an OBB-2 is attached to the camera, the

 

low battery warning is derived from the

 

battery‘s capacity.

MODE

 

button

SEL / SET buttons

 

 

 

 

 

 

Camera Operation

65