ARRI 416 9. Camera Operation, 9.1 Main Camera Switch, 9.2Running and Stopping the Camera

•If using a mains unit, switch it on.

•Connect the camera to the mains unit or battery.

•Push the “ON/OFF” button Aphoto to turn the camera on. Push the “ON/OFF” button for approx. 3 seconds to turn the camera off again.

Note:	If the camera power supply is interrupted, the
	camera remembers whether it was on or off
	before the interruption and returns to that state
	when power is restored. This is useful if the
	camera is rigged in a situation where access is
	difficult as the battery can be changed without
	having to press the “ON/OFF“ button.

A “RUN” button is located on both sides of the camera Aphoto.

RUN button

Camera Operation