ARRI 416 62

Camera Operation

PS/CCU button

LOCK button

NORM button

black bar to indicate Mode 1

PHASE button

RUN button

MODE		button	SEL / SET buttons

Frame Rates

The ARRIFLEX 416 offers the possibility to set and store two frame rates. It is possible to select and store:

•a standard frame rate (23.976, 24, 25, 29.97 and 30 fps)

•and a freely programmed frame rate between 1 and 75 fps in increments of 0.001 fps.

The frame rate is activated via the “NORM“ and “PS/CCU” buttons Aphoto on the left of the camera. The “NORM” setting corresponds to the standard frame rate, the “PS/CCU” position to the freely programmed frame rate.

Selecting a Standard Frame Rate (Mode 1)

Standby Operation

•The camera must be in Mode 1 and the camera must be set to “NORM”.

•Press the “SEL” button repeatedly until the desired frame rate is selected. Within 3 seconds, confirm this choice by pressing the “SET” button, otherwise the initial setting is retained.

Note:	If the total exposed film counter is displayed in
	Mode 1, pressing “SEL“ first steps through the
	digits of the total exposed film counter before
	the choice of frame rate is offered.