6. Magazines | loop protector | safety catch | locking grip | |
|
|
|
| |
|
|
|
|
|
Only the
6.1 Loading the 416 Magazine
Loading the magazine should be practised in daylight with a piece of waste film until the procedure can be carried out confidently in a darkroom or film changing tent.
Cutting the film through the middle of the perforation holes simplifies the loading process considerably. The film head of a fresh roll of film is normally cut in this way.
Step 1: The Feed Side
Load the film into the feed side in absolute darkness (darkroom or film changing tent).
•Remove the loop protector and lay the magazine on a flat surface with its feed side door facing upwards.
•To open the door, flip up the locking grip, depress the safety catch and turn it
•Lift up the magazine cover and remove it by pulling the cover to the right.
Magazines
35