In practice the most important case is a film camera speed of 23.976 fps and a NTSC video assist.

This creates the situation described in the drawing.

From the first film frame, two video fields are derived, the second film frame, three video fields are derived, from the next film frame, two video fields and so on.

The Pull-Down information is created as follows:

Every time, the video field corresponds to a new film frame, the letter will change either from A to B or B to A and the number will be set to 1. As long as no new film frame is taken, the video fields are counted, beginning from 1. Consequently A2 is the first repetition of A1. B2 would be the first repetition of B1, B3 would be the second repetition.

In spite of the fact that the name Pull-Down comes from the working practice in the NTSC systems, where on a telecine the film is running on 23.976 fps and gets converted to

29.97fps, the definition of Pull-Down information on the IVS can also be applied to PAL and to film speeds other than 23.976 fps.

 

 

Film

 

Film

Film

 

Film

 

 

 

 

1

 

2

3

 

4

 

 

A1

A2

B1

B2

B3

A1

A2

B1

B2

B3

Like all man readable information, the data is inserted as a window on the monitor image. The window can be switched on and off independently. Background, position and character format can be altered without affecting the settings of other windows.

Note:

Pull-Down information is only inserted when

 

timecode is actually recorded on film. If there is

 

no timecode recording, for example because

 

the camera is not running on a timecode speed,

 

only A1 will be displayed.

Video-Asssist-System

161