Specific safety instructions

Never run the camera without a lens or a protective cap in the lens mount receptacle!

Never operate the magazine release mechanism while the camera is running!

As the iris ring end-stops of the ARRIMACRO lenses move when the lens is focussed,

the ARRIMACRO lenses must not be used with the ARRI Wireless Remote System (WRS) or the Lens Control System (LCS).

There is danger of injury with rotating drive gears on the lens barrel, or when switching the operating direction of the 416 PLUS, UMC-1 and UMC-3 motor drives!

Any violation of these safety instructions or the non- observance of personal care could cause serious injuries (including death) and damage to the system or other objects.

Note:

Notes are used to indicate further information

 

or information from other instruction manuals.

Aphoto indicates objects, which are shown in the illustration.

Product Identification

When ordering parts or accessories, or if any questions should arise, please advise the model type and serial number of the product in question.

Safety Instructions