Camera Operation

MODE

 

button

SEL / SET buttons

 

 

 

 

 

 

Setting the Low Battery warning level (Mode 3)

When the 416 is not powered by an OBB-2, it is possible to set the threshold at which the Low Battery warning is triggered. It can be set anywhere between 20.0 and 29.9 volts.

•Change from Mode 1 to Mode 3 by pressing the “MODE” button twice.

•Press the “SET“ button. The currently set Low Battery warning level is displayed for 3 seconds.

•To change the level, press the “SEL“ button 3 times to select the 2nd voltage digit or 4 times to select the 3rd voltage digit. The selected digit will blink.

•Adjust the blinking digit with the “SET“ button.

•Once the 2nd and 3rd voltage digits are set as required, press the “SEL“ button once to exit the adjustment mode.

66