The 416 Standard Camera Handle can be extended with the Handle Extension Block HEB-1 Aphoto. The Handle Extension Block can be mounted to any of the 3/8-16 holes by first placing the 2 pins Aphoto into the corresponding pin holes on the handle and then fastening the extension block screw Aphoto inside the extension block by using a long 5mm Allen key. Note that the viewfinder cannot be swung over to the camera right side when the Handle Extension Block is attached to the front of the 416 Standard Camera Handle.
Note: | The 416 Standard Camera Handle is positioned |
| in the centre of gravity for a typical configuration. |
416 Riser
A flat base with diverse attachment points for use when attaching the 416 to a Steadicam plate or other flat surface. Useful when working with Lightweight Support LWS-5, in order to have LWS-5 clear the mounting surface. Useful since 416 bottom threads are not compatible with some Steadicam plates. Also useful in situations requiring additional mounting security.
