ARRIFLEX 416 Plus

12.4 Camera Remote Control

Note:

For details of how to use the RCU-1, WRC-1

 

and ESU-1, please see the instruction manuals

 

supplied with these units.

The 416 Plus can be remotely controlled by cable and via wireless remote control.

Only one camera control unit may be used with the 416 Plus at any one time. More than one WMU-3 can be used in parallel.

If the WRC-1 is used to control the camera either wireless (with WMU-2/3) or with a cable to the LCS bus (with WHA-2/3), the CCU LED turns from green to red to indicate that the REMOTE connector is not available.

The following pages show some examples of remote control setups:

If RCU/WRC and ESU are used in parallel they can be connected to the “REMOTE” socket via the splitter cable KC-88-5.

196