Accesssories

WL-3

HE-4

switch

Work Light WL-3

•Screw the work light into the Accessory Rosette.

•Connect the plug to an “RS” socket.

•Bend the flexible arm, to bring the work light into the desired position. The work light can be turned on and off with the ring on the lamp head Aphoto. The brightness of the work light can be adjusted with the mechanical shutter.

Heated Eyecup HE-4 & HE-5

The heated eyecup prevents the eyepiece Aphoto from misting-up, e.g. when filming outdoors in cold weather.

•Pull the normal eyecup off the eyepiece and replace it with the heated eyecup.

•Connect the heated eyecup to the heated eyepiece outlet with cable KC-63.

•Set the heating level with the toggle switch Aphoto: “LO”: low heat output

“HI”: higher heat output.

If the camera and accessories are powered by battery, switching off the eyecup during extended breaks in filming will help conserve power.

204