Note: | Sharpness 1 corresponds to the settings of older |
| IVS types e.g. the IVS 235. |
Composite or Y/C signal at the BNC Connectors
The IVS has two BNC sockets which can be switched to output two independent composite signals or one Y/C signal. If selected, the Y/C signal comes from the same BNC connectors on which the composite signal is output.
•Move the cursor > with the keys Ê and Ë to the line
– BNC OUT. Pressing the keys Í or Ì will switch the output signal on the BNC connector between composite (VBS) and Y/C
•If Y/C is selected a line symbol – will appear before Y/C DATA indicating that the Y/C output can now be switched between clean video and video with data.
Y/C signal with or without data
The Y/C signal can be switched between clean video and video with data signals. Whichever option is selected the Y/C signal is output from the same pair of connectors
•Move the cursor > with the keys Ê and Ë to the line
– Y/C DATA. Pressing the key Í or Ì will switch between normal video and video with data in the Y/C signal. The line displays Y/C DATA ON or OFF.
MENU VIDEO/TEXT ADJUST
- FLICKERFREE | ON |
- LINE INTERP. | ON |
- SHARPNESS | 2 |
Y/C | |
- Y/C DATA | ON |
- GENLOCK | OFF |
-MINI MON DATA ON
-TXT WHITE LEV. 2
- TXT INVERS | OFF |
- TXT FINE POS | 2 |
- EXIT |
|
MENU VIDEO/TEXT ADJUST
- FLICKERFREE | ON |
- LINE INTERP. | ON |
- SHARPNESS | 2 |
- BNC OUT | Y/C |
ON | |
- GENLOCK | OFF |
-MINI MON DATA ON
-TXT WHITE LEV. 2
- TXT INVERS | OFF |
- TXT FINE POS | 2 |
- EXIT |
|
123