The status LEDs indicate the following:

Color

Status

Off

no motor connected

 

 

Red

motor connected but no control unit found

 

 

Green

motor OK

 

 

Green blinking

motor OK but at an end stop

 

 

Red blinking

motor conflict: CLM-1 assigned to same function

 

 

Red/green alternating

calibrating

The following pages show some possible setups of the LCS and WRS systems. These are only examples and further variations are possible. See the Lens Control System Instruction Manual for more details.

Cables LC-M1, LC-M2, LC-Z1 and LC-Z2 are interchangeable and differ only in appearance and length.

Cable

Appearance

LC-M1

Coiled, 1 m long outstretched

 

 

LC-M2

Straight, 0.5 m long

 

 

LC-Z1

Straight, 3.5 m long

 

 

LC-Z2

Straight, 7 m long

ARRIFLEX 416 Plus

189