Position 2
The insertion of VITC can be on single or multiple lines between lines 6 and 22. If the same line number is selected on both position 1 and position 2, the insertion will be single line; otherwise it will be multiple lines. The value of position 1 can be higher or lower than that of position 2.
•Move the cursor > with the Ê and Ë keys to the line
– POSITION 2. By pressing the Í key the value will be increased until line 22 is selected. By pressing the Ì key the value will be decreased until line 6 is reached.
Exit
Return to the main menu using Exit.
•Move the cursor > with the Ê and Ë keys to the line
– EXIT and press the Í or Ì keys.
Note: | Pressing the Enter/Insert key Ñ for more than |
| three seconds will cause the system to exit the |
| |
| regardless of which menu is activated, with the |
| exception of the positioning mode. |
MENU | VITC LINE |
|
- | VITC LINE | ON |
- | POSITION 1 | 10 |
POSITION 2 | 12 | |
- | EXIT |
|
|
|
|
MENU | VITC LINE |
|
- | VITC LINE | ON |
- | POSITION 1 | 10 |
- | POSITION 2 | 12 |
EXIT |
| |
|
|
|
167