Maintenance

screwsprockets

screw

running surfaces

pressure plate assembly

Magazine

Cleaning the Throat Assembly

The magazine throat assembly Aphoto can be disassembled for cleaning.

•Remove the two screws beside the top and bottom corners of the pressure plate Aphoto.

•Open the take-up side door and fully loosen the screw between the two sprocket rollers Aphoto.

•Flip the magazine over so the screw drops out of engagement with the pressure plate assembly. The screw is captive so it will not fall out and get lost

Aphoto.

•Pull out the pressure plate assembly Aphoto.

•Clean the film running surfaces Aphoto and guide rollers Aphoto with a brush.

•Put the pressure plate assembly back in place. (It fits accurately on dowel pins).

•Refit and tighten the two screws.

214