Activate Format Markings
If the electronic format markings are not parallel to the fibre screen format markings, readjust the CCD chip with the rotation alignment screw, as shown in chapter 10.3.3 Alignment of the image position
Note: | Only active frame lines can be positioned. If no |
| frame line is on (FORMAT OFF), no position line |
| can be reached with the cursor >. If Format 1 is |
| on, only – POSITION 1 can be reached with |
| the cursor >. Only if format 1 & 2 is selected, |
| all - POSITION lines can be accessed. |
It is possible to have no format marking (OFF), format marking number one (1), format marking number two (2) or both format markings at the same time (1 & 2) on display.
•Move the cursor > with the keys Ê and Ë to the line
– FORMAT. Pressing the key Í will switch from OFF to 1 to 2 to 1 & 2 and back to OFF, the key Ì will switch in the opposite direction.
MENU | FORMAT MARKING |
|
- | FORMAT | 1&2 |
POSITION 1 Ö |
| |
- | POSITION 1 Ü |
|
- | POSITION 2 Ö |
|
- | POSITION 2 Ü |
|
- | WHITE LEVEL | 2 |
- | OUTSIDE | LIGHT |
- | EXIT |
|
|
|
|
129