•To switch between clean video and video with data, use the on-screen program mode. Enter the main menu by pressing the Enter/Insert key Ñ for more than 3 seconds. Go to sub menu VIDEO/TEXT ADJUST. The menu point Y/C DATA, which can only be reached if BNC OUT is on Y/C, switches between normal video and video with data on the Y/C signal. The line displays Y/C DATA ON or OFF.

See chapter 10.4 Inserter Facilities for information on the on-screen program mode.

In the normal video output almost no electronic information is inserted. Only a rolling bar at the lower left corner of the video image indicates the film camera is running.

In the video with data output, additional data such as format marks or camera status information, can be inserted.

The É/Y socket is standard BNC for 75 Ω video outputs Aphoto.

MENU

VIDEO/TEXT ADJUST

-

FLICKERFREE

ON

-

LINE INTERP.

ON

-

SHARPNESS

2

-

BNC OUT

Y/C

-> -

Y/C DATA

ON

-

GENLOCK

OFF

-MINI MON DATA ON

-TXT WHITE LEV. 2

- TXT INVERS

OFF

-TXT FINE POS. 2

-EXIT

Video-Asssist-System

83