Displaying the Timecode Time and Frame Rate (Mode 4)
•Press the “MODE“ button until the display shows Mode 4. The display shows the current timecode value.
The top line shows “Hours:Minutes“. The bottom line shows “Seconds:TC generator frame rate“.
Note: | The timecode generator frame rate matches the |
| camera‘s frame rate. |
Turning Timecode Recording On and Off (Mode 4)
Timecode recording is only possible at the Standard Speeds of 23.976, 24.00, 25.00, 29.97 & 30.00 fps.
•Press the “MODE“ button until the display shows Mode 4.
•Press and hold the “SET” button until the “TC“ symbol appears (ON) or disappears (OFF).
Note: | For timecode recording a Timecode Module |
| must be fitted to the magazines. |
Note: | Timecode recording is also turned on when the |
| camera receives a valid timecode signal into |
| the “TCC“ connector. |
Camera Operation
67