AT&T 555-230-223 manual Worksheet B-1 Terminals/Modems, Options Terminal

Appendix B: Supported Terminals and Modems/Option

Worksheet B-1: Terminals/Modems

Date	___________________________
Prepared By	___________________________
Contact Telephone Number	___________________________

To the AE:

Complete this worksheet with the customer before configuring and ordering the DEFINITY LAN Gateway system.

Options Terminal 1 Terminal 2

What type of terminal would you like to use?

Options are: 715 BCT, 513 BCT, 4410, 4415, 4425, 5410, 5420, 5425, and 610 and 615 (using 513, 4410, or 4425 emulation cartridge), or a PC with a 513 or 4410 emulation package or

G3-MA. Also, the Cross-Talk software tool (via 513 emulation), or Telnet with an emulated terminal type of vt100, vt220, vt320, vt950, ibm3101, ibm5051, hp2621, hp2624, ansi, wyse50, wyse60, or PC. (The 715 BCT terminal allows an administrator to toggle between DEFINITY G3 administration screens and DEFINITY LAN Gateway screens.)

How would you like the terminal connected to the DEFINITY LAN

Gateway system? You can implement any of the following:

Directly via cables

Via modem

Options include but are not limited to: AT&T 2400 (2400 baud modem), DM224 (2400 baud modem), DM424 (2400 baud modem), Comsphere 3820 (9600 baud modem), 2212C (1200 baud modem), and 212AB (1200 baud modem).

The DM224 and Comsphere 3820 are orderable at this time.

Via data modules

Options are: one 7400A and one 7400B (recommended), or two 7400As.

Via asynchronous data unit (ADU)

What length cables would you like for the terminals? Default is 70 feet; other options are 5, 10, 30, 40, or 50.

B-2Issue 1 January 1996