System
Moving Around the System
The methods for moving around the DEFINITY LAN Gateway screens are as follows:
1. You can use the function keys on the bottom of the screen ( NXTPG , PRVPG , NXTDAY , and PRVDAY ) to move around screens, as applicable.
NOTE:
An alternate method of using function keys is to press the Ctrl key, and while holding it down, press F . Then release both keys and press the number corresponding to the function key. For example,
function key 3 is Exit . You may press Ctrl F 3 instead, in the |
manner just explained. |
This method is helpful if the keyboard does not properly send or have function keys and works for any terminal type.
See Table
2.You can press the Tab key to move among fields.
3.You can use the arrow keys on your keyboard to move up, down, left, or right on the screen.
4.On menu screens, you can place the cursor on the number to the left of a
menu item on a menu screen and press the ENTER function key. This will display the first screen pertaining to that item.
Alternatively, you can type the number of your selection and this will select the menu item.
Issue 1 January 1996
